Originally Posted by
dougcoleman
When I go to program the homeowner button and select a particular zones controller all I get is an option to set the heating and cooling temp. Not an option to dig deeper into the settings of the zone to put it is vacation mode. So if I am going to have to go to the heating screen in the app and individually set each zone off the schedule and set to 58, say, then the convenience of a button to do all three at once is pointless. I do not see a vacation option on my iPhone app. I see the zone listed, the current setting, a pull down for "Mode, Fan and Schedule" that once pulled down reveals"Mode: Off: Heat:Auto:Emergency" and "Schedule: On:Off". From within schedule there are two settings: "Weekdays:Weekends" Within that "Wake:Home:Away:Sleep". I don't want to have to use "Away" as the vacation setback, as I see "Away" as a short term daily setback when it is likely no one is in the house, but only for a few hours and it doesn't make sense to take the house down to 58 or 60 only to have to heat it up again in 4 hours. Plus it appears that I still couldn't put it into "away" from the button programming anyway.