Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Maestro C-L Digital Dimmers programming

  1. #1
    Junior Member
    Join Date
    Mar 2020
    Posts
    7

    Maestro C-L Digital Dimmers programming

    I have several Maestro MACL-153MHL C-L Digital Dimmers in my basement that I have applied some programming to each one such as Low/High End Trim and Fade On/Off Times. I want to do some additional switch work in the same area of the basement. If I cut the power in order to work in that area will I lose the programming I established in the current Maestro C-L dimmers? Just need a heads-up in order to get my brain around reprogramming should I need to. Or, would I be wise to pull out the FASS on each dimmer in order to save the current programming in those dimmers before I cut power to the area?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,751
    Quote Originally Posted by KBear View Post
    I have several Maestro MACL-153MHL C-L Digital Dimmers in my basement that I have applied some programming to each one such as Low/High End Trim and Fade On/Off Times. I want to do some additional switch work in the same area of the basement. If I cut the power in order to work in that area will I lose the programming I established in the current Maestro C-L dimmers? Just need a heads-up in order to get my brain around reprogramming should I need to. Or, would I be wise to pull out the FASS on each dimmer in order to save the current programming in those dimmers before I cut power to the area?
    Lutron says they have something like a 10 year power failure memory. I've never tested that but you should be good for a couple of hours to change some switches.

    Pulling the FASS won't hurt but I don't believe it is necessary.
    LED, Incorporated
    Raleigh, NC 27614

  3. #3
    Junior Member
    Join Date
    Mar 2020
    Posts
    7
    Thank you again randyc for your help. I just thought that if I cut the power and turned the power back on that it may have an adverse effect on the current programming. Good, if I'm okay for a couple hours that should be good.

Similar Threads

  1. Different Models of Maestro Dimmers
    By Magic in forum General Discussion - Controls
    Replies: 1
    Last Post: 03-05-2020, 01:46 PM
  2. Converting Maestro & Maestro companion dimmers to Caseta
    By doug50 in forum Design Assistance - Controls
    Replies: 2
    Last Post: 12-12-2018, 09:16 AM
  3. Maestro Digital Dimmer not programming the way it should
    By leftbrain99 in forum Troubleshooting - Controls
    Replies: 3
    Last Post: 07-03-2016, 09:09 AM
  4. Replies: 3
    Last Post: 02-29-2016, 02:31 PM
  5. Programming local dimmers in HomeWorks QS
    By Craig W. in forum Programming - HWQS
    Replies: 1
    Last Post: 09-03-2013, 10:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •