Lutron Fan Control

[Wamblej]

I am trying to determine if fan control will work on the fans we have. we bought hunter Dempsey ceiling fans. They come with no pull chains and only a remote. I know this isn’t the ideal situation for the Lutron fan control.

Can I do either of the following?

1. Turn the remote on to full speed as you would the pull chain and then use the Lutron fan control.

2. Install a Lutron on off switch 5a or 6a just to toggle the on or off of the fan.

My ideal would be #1 but I don’t think it is an option.

[SDR-Mike]

Unless the control is for a module that can be removed, then #2 is your only option. If there is a module that can be removed, then check if it is a DC motor, then #2 is your only option. To use Lutron fan speed controls for #1, you need a "permanent split capacitor" motor- or easier put- pull chains on the older big motor.