Originally Posted by
KBear
I recently installed several Sunnata Touch Dimmers in my home. They all work amazing indeed. However, yesterday morning I go to the dining area touch dimmer and the light bar is not lit. I try the lights and nothing happened. The lights would not turn on at all. My first thought was maybe a breaker was switched (power surge?) but before removing the cover plate to the dimmer I checked with a volt meter to make sure it was getting power and, yes, it's getting power. I turned off the whole house breaker to check the turmination wiring on the dimmer. Checked to make sure all wire turmination connections were solid with no issues. I carefully returned the wires to their respective locations within the box, turn the main breaker back on and the dimmer was back in working order.Does the Sunnata Touch Dimmer have an internal breaker that can be reset by turning the power to that dimmer off then back on? What might cause a Sunnata Touch Dimmer to all of a sudden stop working over night then begin working after inspection and main power off then on again? Any thoughts would be appreciated.