Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Programming toggle - unexpected results

  1. #1
    Junior Member
    Join Date
    Apr 2019
    Posts
    1

    Programming toggle - unexpected results

    Sorry in advance for the newbie question.

    1. Hot Water recirc pump - programmed to button 5 on a keypad 2
    2. Bath Sconce - programmed to button 4 on keypad 1 and keypad 2

    Current operation:
    -Have the recirc on a 15 minute timer so when button 5 is depressed the pump runs for 15 minutes. Can also manually turn off by depressing button 5.
    -Sconce is simple and can be turned on/off from either keypad 1 or 2

    Desired outcome-
    -Depress button 5 on keypad 2 in the morning, recirc pump starts and sconce comes on.
    -Button 4 still controls the sconce

    Programmed
    -added the sconce to button 5 on keypad 2
    -all buttons are Toggle Control

    Outcome
    -Button 5 turns on the recirc pump and sconce. So far so good.
    -Button 4 turns off the recirc pump. No good, just want it to control the sconce.

    No change to the programming of button 4

    How do I program button 5 to turn on the pump and sconce and also turn off the pump and sconce when depressed without affecting the sconce?

    Thanks for your help
    Ron

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,836
    Quote Originally Posted by rlovetri View Post
    How do I program button 5 to turn on the pump and sconce and also turn off the pump and sconce when depressed without affecting the sconce? Thanks for your help Ron
    I'm not sure what this means??

    If you are using a standard toggle button you can go to the "off level" tab and change the sconce to unaffected. You would have to use one of the other buttons to turn the sconce off.
    LED, Incorporated
    Raleigh, NC 27614

Similar Threads

  1. Replies: 2
    Last Post: 07-06-2019, 01:00 PM
  2. Programming VCRX output to toggle garage door
    By timchaas in forum Programming - HWQS
    Replies: 1
    Last Post: 11-19-2018, 10:39 AM
  3. Test results from 3 BR30 (65W, ~2700K) in 2 Caseta dimmers
    By forumuser72 in forum Compatibility - LED
    Replies: 1
    Last Post: 05-05-2018, 11:12 PM
  4. encountered an unexpected error
    By Chuck in forum Troubleshooting - HWQS
    Replies: 1
    Last Post: 05-21-2015, 09:22 AM
  5. Manual Keypad Programming - Toggle
    By paulhanks in forum Programming - RA2
    Replies: 1
    Last Post: 12-24-2013, 09:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •