Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Updating legacy project to a newer version

  1. #1
    Junior Member
    Join Date
    Mar 2020
    Posts
    2

    Question Updating legacy project to a newer version

    Hi, I once ran into an urgent sitution where i had to reprogram a clients lighting scenes and keypad buttons, however the system was running HWQS v12.1 and I only had HWQS v14.5 installed with no internet to download the legacy softwareUpon loading the project file to my HWQS v14.5 software it prompted me to update the file before i could make changes.My Question is: Would updating the file to the newer version and then uploading it to the processor have any kind of negative impact on the system?Thanks

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    Quote Originally Posted by JBass101 View Post
    Hi, I once ran into an urgent sitution where i had to reprogram a clients lighting scenes and keypad buttons, however the system was running HWQS v12.1 and I only had HWQS v14.5 installed with no internet to download the legacy software Upon loading the project file to my HWQS v14.5 software it prompted me to update the file before i could make changes.My Question is: Would updating the file to the newer version and then uploading it to the processor have any kind of negative impact on the system?Thanks
    14.5 will disable Home Control +. There is probably an OS update associated with 14.5. Once you update it will be harder to load 12.1 if you decide to roll-back. Functionally there should be no issue with migrating from 12.1 to 14.5.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3
    Junior Member
    Join Date
    Mar 2020
    Posts
    2
    Noted. Thanks much appreciated

Similar Threads

  1. updating Bridge2
    By JCEnergy in forum Troubleshooting - RA2
    Replies: 7
    Last Post: 01-02-2020, 03:04 PM
  2. Updating and Arriving Leaving Errors
    By Trainwrecks in forum Troubleshooting - CAS
    Replies: 3
    Last Post: 03-13-2019, 02:34 PM
  3. Problem updating to 11.0 from 10.6
    By mikerpalmer in forum Troubleshooting - RA2
    Replies: 4
    Last Post: 04-20-2017, 11:35 AM
  4. Newer Cree lamp and RRD 10 ND
    By digit1 in forum Performance Issues - LED
    Replies: 4
    Last Post: 11-02-2015, 08:16 AM
  5. Updating Bridge
    By Nick.F in forum Troubleshooting - CAS
    Replies: 3
    Last Post: 06-06-2015, 10:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •