Originally Posted by
armyguns
I need some design help. I have three outside light fixtures. Two are controlled by separate single pole switches. The third is controlled by 2 three-way switches. Two of the fixtures are double bulb halogen flood lights. The third is a standard 60 watt ‘porch light’ type incandescent fixture. There are no dimmers, timers or photocells involved. The switches are NOT located in the same gang box. Ground wires are available at each switch. Rewiring is not an option. I want to be able to turn all three fixtures on/off at the same time from any of the current 4 switch locations. Ideally, I would like to be able to add another switch to be able to turn all lights on/off from, but my basic requirement is to be able to turn them on/off from the existing switch locations. What components would you suggest I use?