Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: QSE-IO show status of CCI on Keypad LED

  1. #1
    Junior Member
    Join Date
    Feb 2019
    Posts
    2

    QSE-IO show status of CCI on Keypad LED

    Hi, We have a QSE-IO that turns a device on and off with a pulse of a single contact closure. The device also has feedback that indicates if the device is running or not which we have wired into a CCI of the QSE-IO. How do I take the value of the CCI and turn on/turn off the LED on a keypad button to indicate the state? (This button is also the button that pulses the CCO to turn on/off the device). Thanls

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    Quote Originally Posted by chazman88 View Post
    Hi, We have a QSE-IO that turns a device on and off with a pulse of a single contact closure. The device also has feedback that indicates if the device is running or not which we have wired into a CCI of the QSE-IO. How do I take the value of the CCI and turn on/turn off the LED on a keypad button to indicate the state? (This button is also the button that pulses the CCO to turn on/off the device). Thanls
    Create a phantom lighting zone and assign it to a switch. Then assign the zone to the CCI. When the CCI opens/closes it will turn the phantom light on/off. You can also assign the phantom light to a keypad. I would make the level on the keypad "unassigned" in both the on and off tabs. This will keep the feedback from getting out off sync.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

Similar Threads

  1. No Continuing Education Road Show this year?
    By SparkyCoog in forum General Discussion - HWQS
    Replies: 4
    Last Post: 11-02-2020, 06:25 AM
  2. In-Wall Dimmer won't show up for Room Assignment in Lutron App
    By checkyourmirrors in forum Troubleshooting - CAS
    Replies: 3
    Last Post: 01-29-2017, 02:43 PM
  3. New app can't show a whole keypad as a Favorite?
    By wkearney99 in forum General Discussion - RA2
    Replies: 1
    Last Post: 05-09-2016, 03:23 PM
  4. IFTTT recipes never show scene names
    By bentwookie in forum 3rd-party Integration - CAS
    Replies: 10
    Last Post: 04-13-2016, 01:33 PM
  5. LED On For Only One Button When a Specific Show is Running
    By Armando B. in forum Programming - HWQS
    Replies: 0
    Last Post: 01-16-2015, 05:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •