I have had my Caseta In-Wall dimmer switches installed throughout the house for a number of years now. Never had a single issue. I just replaced my standard E26 garage lights (I had 1 200watt bulb in each of the 2 sockets in the garage) with Mofut LED lights. These are 3 panel adjustable LED lights that just screw into the E26 socket. The new lights do not work. Each light is rated at 60 watts. When I put them in, the Caseta switch itself does not light up and thus the lights don't work. The garage light switch/dimmer is the center switch in a 3 gang plate of Caseta dimmers. The new LED lights themselves work as I tested one in my kitchen light by replacing one of the 3 bulbs in a chandelier with the Mofut LED panel light. Those kitchen lights are on a 2 gang Caseta plate. Not sure what the issue would be here as I was previously using the 2 200 watt bulbs in the garage, but the new 60 watt lights do not seem to work on the 3 gang switch. Any help would be greatly appreciated.