Sorry in advance for the newbie question.
1. Hot Water recirc pump - programmed to button 5 on a keypad 2
2. Bath Sconce - programmed to button 4 on keypad 1 and keypad 2
Current operation:
-Have the recirc on a 15 minute timer so when button 5 is depressed the pump runs for 15 minutes. Can also manually turn off by depressing button 5.
-Sconce is simple and can be turned on/off from either keypad 1 or 2
Desired outcome-
-Depress button 5 on keypad 2 in the morning, recirc pump starts and sconce comes on.
-Button 4 still controls the sconce
Programmed
-added the sconce to button 5 on keypad 2
-all buttons are Toggle Control
Outcome
-Button 5 turns on the recirc pump and sconce. So far so good.
-Button 4 turns off the recirc pump. No good, just want it to control the sconce.
No change to the programming of button 4
How do I program button 5 to turn on the pump and sconce and also turn off the pump and sconce when depressed without affecting the sconce?
Thanks for your help
Ron