Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: Difference between Lutron Sivoia QS Wireless Power Supply Panels

  1. #1
    Junior Member
    Join Date
    Feb 2019
    Posts
    1

    Difference between Lutron Sivoia QS Wireless Power Supply Panels

    Hello - I'm trying to figure out what the difference is between two panels that claim to both support Lutron Sivoia QS Wireless shades. The two model numbers are:
    QSPSY-10PNL - http://www.lutron.com/TechnicalDocum.../085355_EN.pdf - this claims to output 35V per channel to 10 channels and QSPSY-P1-10-60 - http://www.lutron.com/TechnicalDocum...25_4_15_09.pdf - this claims to output 24V per channel to 10 channelsDoes anyone know the difference between these two units and which one should be used when powering Lutron Sivoia QS Wireless shades? I would think based on reading about the shades that the 24V output is more appropriate, but the sivoia qs website lists the QSPSY-10PNL as the power panel while the other is not mentioned explicitly, though the documentation for the P1-10-60 is still available on the lutron website.Thanks,John
    Last edited by jcacavias; 02-12-2020 at 09:56 AM. Reason: formatting

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,516
    Quote Originally Posted by jcacavias View Post
    Hello - I'm trying to figure out what the difference is between two panels that claim to both support Lutron Sivoia QS Wireless shades. The two model numbers are: QSPSY-10PNL - http://www.lutron.com/TechnicalDocum.../085355_EN.pdf - this claims to output 35V per channel to 10 channels and QSPSY-P1-10-60 - http://www.lutron.com/TechnicalDocum...25_4_15_09.pdf - this claims to output 24V per channel to 10 channelsDoes anyone know the difference between these two units and which one should be used when powering Lutron Sivoia QS Wireless shades? I would think based on reading about the shades that the 24V output is more appropriate, but the sivoia qs website lists the QSPSY-10PNL as the power panel while the other is not mentioned explicitly, though the documentation for the P1-10-60 is still available on the lutron website.Thanks,John
    The QSPSY-P1-10-60 is the older model and may not be available. The design is a carryover from the Sivoia QED family.

    The QSPSY-10PNL is the newer model. It has modular power packs (ordered separately) so you don't have to pay for 10 outputs if you only need 4 or 5. There is also a 30 output version of this panel.

    Most of the QS stuff now says 35v. I think some of the older stuff said 24v.
    LED, Incorporated
    Raleigh, NC 27614

  3. #3
    We had to swap a shade power supply panel recently, and I was a little weary of using 35V to power shades that were powered by a 24V power supply. I reached out to support and they said it was no problem- the power supply will adjust and send 24V to the shades. They ended up being fine, but why do they not mention that in the documentation?

  4. #4
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,516
    Quote Originally Posted by johnmax View Post
    We had to swap a shade power supply panel recently, and I was a little weary of using 35V to power shades that were powered by a 24V power supply. I reached out to support and they said it was no problem- the power supply will adjust and send 24V to the shades. They ended up being fine, but why do they not mention that in the documentation?
    Lutron is pretty liberal with their documentation but it is not very consistent. I've also seen 24-36v referenced for QS products.
    LED, Incorporated
    Raleigh, NC 27614

Similar Threads

  1. Replies: 1
    Last Post: 02-26-2019, 01:08 AM
  2. CREE LMD300-0040-c900-7030000 power supply -Lutron dimmer
    By ShineOnLED in forum General Discussion - Controls
    Replies: 1
    Last Post: 03-13-2017, 10:25 AM
  3. Lutron App for Caseta Wireless and Sivoia QS Wireless Shades
    By oleggold in forum Programming - CAS
    Replies: 1
    Last Post: 11-05-2016, 11:43 PM
  4. Convert Sivoia QS Wireless from Battery to CSPS-P1-10-6 Power Panel
    By jfbordenjr in forum General Discussion - Shades
    Replies: 4
    Last Post: 11-07-2013, 05:36 PM
  5. Sivoia QS Wireless Power Options?
    By waveform in forum Design Assistance - Shades
    Replies: 2
    Last Post: 10-15-2013, 12:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •