Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Mounting driver to box

  1. #1
    Junior Member
    Join Date
    Feb 2020
    Posts
    1

    Mounting driver to box

    I have several LTEA4U1UKS-AV120. Some variants online seem to have a back plate that mounts directly to an electrical box, but mine do not.Are these designed to mount to any particular type of box? Or is there a way to buy the back plate that mounts directly to a standard two gang sized box?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    Quote Originally Posted by jtc331 View Post
    I have several LTEA4U1UKS-AV120. Some variants online seem to have a back plate that mounts directly to an electrical box, but mine do not.Are these designed to mount to any particular type of box? Or is there a way to buy the back plate that mounts directly to a standard two gang sized box?
    It doesn't seem to be a standard option. You probably need to call Lutron to see if they have a plate.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Posts
    87
    Hello jtc331,Thank you for your post! Please see the spec sheet for the Lutron Hi-lume 1% 2-wire LED Driver @ http://www.lutron.com/TechnicalDocum...369543_ENG.pdf The "KL" option of the driver can be ordered and comes mounted to a standard 1900 J-box as seen in the picture on the first page and is UL rated to be remotely mounted. The best bet for potentially procuring the adapter plates you are referencing would be to contact our 24/7 technical support team @ 1-888-Lutron1 (588-7661) and follow the prompts for the "Comm Wallbox" queue.Hope this info helps!-JustinF.

Similar Threads

  1. Pico Wireless Control Mounting
    By Captainminibar in forum General Discussion - RA2
    Replies: 1
    Last Post: 12-21-2019, 10:19 PM
  2. LED driver compatibility
    By Tankled in forum Compatibility - LED
    Replies: 2
    Last Post: 09-22-2016, 12:29 PM
  3. Mounting of DIN Rail Dimming/Switching Modules
    By oldguy in forum General Discussion - HWQS
    Replies: 1
    Last Post: 05-24-2016, 11:49 AM
  4. LED application - is there a driver for?
    By totalcontrol in forum Design Assistance - RA2
    Replies: 1
    Last Post: 04-19-2016, 08:11 AM
  5. Dynamic Keypad Mounting Frame
    By Armando B. in forum Design Assistance - HWQS
    Replies: 1
    Last Post: 05-28-2014, 12:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •