Hi there,I'm struggling with a problem with HWQS for quite a few. I have this very large client which uses a HWQS system, with 9 processors and literally hundreds of loads. I have programmed several timeclock schedules for turning lights on and off. Most of them work ok, but some fail to activate/deactivate loads. This has been going for more than two years so far, and Lutron was never able to help us fix the problem. The thing is now i'm having the same problem on my own system at home, which is very small. I have a store on the corner of my house, which is run by my wife, and the HWQS system is supposed to control the front lights for the store along with our in house lights. The main front light is supposed to be turned off at 05:00 AM. The timeclock is ran, the app shows that no light is turned on, if i open the load on Lutron Connect it shows the load as OFF, but it's actually ON.Here is the link to today's photo and screenshots https://photos.app.goo.gl/cYcFsb5WNSYCmPDT9. *was unable to add attachments.