I have 4 fans controlled in my house with the MACL-LFQ, unfortunately they are all the same make and model (Minka Aire Rudolph, 16W light kit LED), so I can't test specifically for fan compatibility. Spec sheets for fan and light kit:https://www.minkagroup.net/images/pr...F727-BN_MM.pdf https://www.minkagroup.net/images/pr...K9727L-ORB.pdfAll 4 fans function properly with other LED fan/light dimmers.With the MACL-LFQ, the lights and fans operate fine with their respective controls and everything is wired properly. However, when the fan is on the light comes on very faintly where it is essentially unnoticeable in a moderately lit room, but very noticeable in sleeping conditions at night. Speed of the fan does not affect the brightness of the glow.I found this thread but his issue if when the controls are off, which isn't my issue: https://forums.lutron.com/showthread...bulbs-when-off Anyone encounter this or have any solutions? All other models on the market are quite ugly with the sliders and the whole house has lutron controls which is nice and I'd like to keep it like that if possible. Appreciate the help!