Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: MAIN-REP ethernet port

  1. #1
    Junior Member
    Join Date
    Oct 2013
    Posts
    1

    MAIN-REP ethernet port

    I have a radio Ra2 system, all was well. System on UPS. iPad, iPhone, Ra2 v6.0.0, Life was good.
    POOF!!
    Cannot talk to MAIN-REP through Ethernet port. No lights on cat5 port, cable good, MAIN-REP works like a charm, I just cannot talk to it. Router good.
    Any suggestions????

  2. #2
    Authorized Lutron Contributor
    Join Date
    Apr 2013
    Posts
    403
    hinkelmann, To better help determine if the Ethernet port on the main repeater has failed we would recommend in this case to call our technical support at 1-800-523-9466.

  3. #3
    Quote Originally Posted by hinkelmann View Post
    I have a radio Ra2 system, all was well. System on UPS. iPad, iPhone, Ra2 v6.0.0, Life was good.
    POOF!!
    Cannot talk to MAIN-REP through Ethernet port. No lights on cat5 port, cable good, MAIN-REP works like a charm, I just cannot talk to it. Router good.
    Any suggestions????
    Try to ping it. That being said, if your cable pins out and your router port is good ( I have seen a switch port go bad) sounds lik the port on he repeater is toast.
    i recently had a rs232 port get fried from lightning. It can happen.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •