Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Single pole operation reversed

  1. #1
    Junior Member
    Join Date
    Jan 2020
    Posts
    2

    Single pole operation reversed

    Hello, I installed Lutron Claro single pole switch today, but the switch operation is reversed. It turns on when the switch is in OFF position, and off when it is in ON position. Is there any way I can fix it? Thanks in advance!PS: It has Lutron letters written at the bottom of the switch, so I can't just reverse the switch.

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,516
    Quote Originally Posted by raini View Post
    Hello, I installed Lutron Claro single pole switch today, but the switch operation is reversed. It turns on when the switch is in OFF position, and off when it is in ON position. Is there any way I can fix it? Thanks in advance!PS: It has Lutron letters written at the bottom of the switch, so I can't just reverse the switch.
    When installed the 2 terminal screws on the back should be facing right. If the switch is still working backwards you might be able to swap the plastic. If it is new, I'd just return it rather than risk breaking the plastic.
    LED, Incorporated
    Raleigh, NC 27614

  3. #3
    Junior Member
    Join Date
    Jan 2020
    Posts
    2
    Quote Originally Posted by randyc View Post
    When installed the 2 terminal screws on the back should be facing right. If the switch is still working backwards you might be able to swap the plastic. If it is new, I'd just return it rather than risk breaking the plastic.
    Okay, thank you for the reply!

Similar Threads

  1. Single pole switch for ceiling fan
    By Dfish in forum General Discussion - Controls
    Replies: 1
    Last Post: 10-10-2019, 03:42 PM
  2. Single pole switch replacement
    By Robocheme in forum General Discussion - CAS
    Replies: 5
    Last Post: 11-18-2018, 10:20 AM
  3. Single pole switch with four wires plus ground?
    By cyberskier in forum Troubleshooting - CAS
    Replies: 5
    Last Post: 01-06-2018, 11:57 AM
  4. Single pole no longer works
    By Yee379 in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 01-03-2018, 01:44 PM
  5. Switch Operation is Reversed
    By chuckc3 in forum Troubleshooting - Controls
    Replies: 5
    Last Post: 08-23-2017, 11:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •