Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Lutron Caseta LED Strip Lights Flickering

  1. #1
    Junior Member
    Join Date
    May 2017
    Posts
    2

    Lutron Caseta LED Strip Lights Flickering

    I have 3 lighted signs in my front office working with a PD-6WCL. The signs have led strip lighting with a 24v power supply inside. I am not trying to dim them, just want to run them full power. When I disconnect 2 of them , one of them will work fine. When I connect all 3 together , all 3 flicker. I have tried a Lutron LUT-MLC without any luck. Any suggestions?Also can a PD-6ANS be used only with 2 power wires?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    Quote Originally Posted by kingcity63 View Post
    I have 3 lighted signs in my front office working with a PD-6WCL. The signs have led strip lighting with a 24v power supply inside. I am not trying to dim them, just want to run them full power. When I disconnect 2 of them , one of them will work fine. When I connect all 3 together , all 3 flicker. I have tried a Lutron LUT-MLC without any luck. Any suggestions?Also can a PD-6ANS be used only with 2 power wires?
    The 6ANS requires a hot, neutral and switch leg (wire going to the signs). It sounds like you don't have a neutral??

    The PD-5WS does not require a neutral.

    The MLC was designed to work with switches. If the signs are non-dim, the switch and/or MLC should work.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

Similar Threads

  1. Caseta PD-5NE-WH Lights Flickering
    By Skyeler in forum Troubleshooting - CAS
    Replies: 3
    Last Post: 01-02-2020, 02:52 PM
  2. Lutron L3D0-96W24V-U - reccomended LED Strip?
    By Kev639 in forum General Discussion - LED
    Replies: 2
    Last Post: 10-27-2018, 01:25 PM
  3. Led Lights Flickering with Caseta Switch
    By vdiddy in forum Troubleshooting - CAS
    Replies: 4
    Last Post: 07-31-2018, 04:53 AM
  4. How to Dim LED strip lights with Caseta
    By blbarge in forum Design Assistance - CAS
    Replies: 3
    Last Post: 08-06-2017, 09:28 AM
  5. LED strip lights + Caseta + Wink?
    By nebster in forum Design Assistance - CAS
    Replies: 6
    Last Post: 10-21-2016, 11:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •