Can someone please explain to me how the "switched hot" line of the LMJ-5T-DV-B functions? I can see in advanced settings an "on level" which I assume sets a trigger to turn it on but what turns it off?Can anyone provide any insight?
Can someone please explain to me how the "switched hot" line of the LMJ-5T-DV-B functions? I can see in advanced settings an "on level" which I assume sets a trigger to turn it on but what turns it off?Can anyone provide any insight?
The LMJ-5T is like 2 devices in 1 but works like any other dimmer. If you need to turn the lights on/off it applies or removes power from the switched hot. If you need to dim, it uses the 10v output.
The "on level" is the same function as any electronic dimmer. If you physically push the ON button at the LMJ the lights will go the the level you set.
I'm not sure what your application is but the LMJ does not have any auto-on or sensor capability. You must use the physical buttons on the device or send commands from a RA2 or HQS system to control the lights.
Convergence Technologies Raleigh, North Carolina
www.convergenceusa.com