Originally Posted by
gbagley
Trying to program a switch to blink the LED while a sequence is running, but it's not working for me.Switch is programmed as a 'normal' toggle, which 'Press On' triggering an automatic sequenceLED Logic is set to 'Defined by sequence'In the automatic sequence, the first step has Status LED set to 'Blink'. This first step is set to automatically go to next step (stop sequence) after 30 minutes.The LED should be blinking while the sequence is running, right? I just get a solid LED. Trying to figure out what I'm missing. The switch/sequence otherwise works as expected (it's a 30 minute timer on a fan - so just turn on, wait 30 minutes, then turn off).