Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: How to prevent manual shut-off

  1. #1
    Junior Member
    Join Date
    Dec 2019
    Posts
    1

    How to prevent manual shut-off

    I intend to use this motion sensor in a closet. I want to prevent someone that is in the closet from turning the light out without the light coming back on within seconds. I have an MS-OPS2H switch. This is a security issue. Is this possible with this switch. If not, which model do I need?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,781
    The MS-OPS2, MS-OPS5M, and MS-OP6M2x have a feature called "exit time delay." If you manually turn the switch off, auto-on is disabled for 25 seconds. This allows you to leave the room without your motion turning the lights back on. I don't believe there is a way to modify or disable this feature.

    They also have a feature called "off while occupied." The example they give is where you want the lights off in a classroom for a projector but you don't want the speakers movement to turn the lights back on. It doesn't sound like this is what you are looking for though.

    You could use a RPS sensor with a Caseta switch. I would check with tech support to confirm it will do what you want though.
    LED, Incorporated
    Raleigh, NC 27614

Similar Threads

  1. Lights full on after being shut off by fixture snesor
    By Pck82 in forum General Discussion - Vive
    Replies: 4
    Last Post: 04-03-2019, 03:23 PM
  2. Caseta in-Wall Dimmer comes on randomly - won't shut off
    By rdporter81 in forum Troubleshooting - CAS
    Replies: 7
    Last Post: 04-18-2018, 11:59 AM
  3. Graphik T won’t shut off
    By userdww in forum Troubleshooting - Controls
    Replies: 3
    Last Post: 01-22-2018, 10:45 AM
  4. Manual on/off
    By Martin mann in forum Programming - Controls
    Replies: 1
    Last Post: 05-31-2017, 05:05 PM
  5. Lutron C-L digital dimmer (MACL-153MLH-WH Won't Shut Off
    By RayPaula in forum Troubleshooting - Controls
    Replies: 2
    Last Post: 07-18-2016, 11:02 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •