Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Pico Wireless Control Mounting

  1. #1

    Pico Wireless Control Mounting

    Does the unit need a wall box? Or can I mount it on a WBX-ADAPT to the flat wall and a screwless wallplate without cutting a hole?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,784
    No hole required. On the back of the Pico there is a clear plastic adapter. Mount it to the wall and then slide the Pico onto it. The screws must be flush with the clear plastic. If they protrude, even slightly, the Pico won't slide on. You can then mount a plate around the Pico if desired.

    The WBX-ADAPT is only required if you are mounting the Pico to a switch box.
    LED, Incorporated
    Raleigh, NC 27614

Similar Threads

  1. Replies: 2
    Last Post: 05-28-2019, 10:14 AM
  2. Mounting of DIN Rail Dimming/Switching Modules
    By oldguy in forum General Discussion - HWQS
    Replies: 1
    Last Post: 05-24-2016, 11:49 AM
  3. Pico with HWQS Wireless
    By Germany_FFM in forum Programming - HWQS
    Replies: 1
    Last Post: 07-16-2014, 05:39 PM
  4. Dynamic Keypad Mounting Frame
    By Armando B. in forum Design Assistance - HWQS
    Replies: 1
    Last Post: 05-28-2014, 12:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •