6 months ago I replaced a fan/light with an 120V LED Chandelier and installed an PD-5ANS. Other than the bulbs giving off a slight glow when turned off, the switched worked fine. Before replacing the PD-5ANS with a PD-6WC last night, I installed dimable versions of the same bulbs and the glow disappeared. After installing the PD-6WC it didn't display a light on the swtich but the bulbs remained constantly on.I have the 2 black cables on the switch connected to the 2 black cables in the wall and green to the ground. The white cables and single red cable in the wall are capped off.Does anyone have any suggestions on what I may be doing wrong?Cheers.