hi everyone, looking for some assistance on this installation, don't know if I need to get a 5WS switch instead. Want to use 6ANS with 2 Pico's.here is the layoutLocation 1:2 Romex into box1 two wire: black and white1 three wire: black, white and red- black wires are tied together, white wires are on the bottom of the switch (black screw) and red single wire on topLocation 2:2 Romex into boxboth romex's are tree wires: black, white and red- black wires tied together, red wires on the bottom of the switch and white wires on the top of the switchLocation 3:1 Romex into boxthree wire - black, red and white- Black and white connected at the bottom of the switch and red by itself on the top.Hopefully I can try to upload some pictures.