Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: How do you "see" a caseta in a dark room

  1. #1
    Junior Member
    Join Date
    Dec 2019
    Posts
    1

    How do you "see" a caseta in a dark room

    Been experimenting with a Caseta dimmable unit. Vertical LEDs are useful to see where the dimming range is set. However, I have not been able to figure out if there's an always-on single LED so you can find the device in a dark room?

  2. #2
    Junior Member
    Join Date
    Aug 2019
    Posts
    23
    All Caseta Dimmers/Switches have green indicator lights on them. When in the on position they are bright. However, when the unit is turned off they are still illuminated at a low level so that the device can be located in the dark. All seven indicator lights on the dimmer and one indicator light on the switch will glow in the off position so that they can be seen at night.

  3. #3
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,367
    All of the LEDs glow when the load is off. You can turn the feature on/off with some Maestro models. There is no way to edit or adjust the function in Caseta.
    LED, Incorporated
    Raleigh, NC 27614

Similar Threads

  1. Bathroom lights to "night level" with Caseta Dimmer?
    By warder in forum General Discussion - CAS
    Replies: 3
    Last Post: 03-29-2019, 04:33 PM
  2. Caseta control with "Ok Google"
    By regulatorfix in forum General Discussion - CAS
    Replies: 2
    Last Post: 12-11-2018, 10:10 AM
  3. "Sivoia QS" versus "QED QS" & extending existing system
    By jfmartin in forum General Discussion - Shades
    Replies: 4
    Last Post: 09-27-2018, 08:57 PM
  4. "TRANSFER" resets all occupancy sensors to "Enabled"
    By joshg in forum Programming - RA2
    Replies: 0
    Last Post: 01-15-2017, 02:32 PM
  5. Replies: 10
    Last Post: 04-04-2014, 09:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •