Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Dimmable T8 tubes or panels with high CRI (90 and above)

  1. #1
    Junior Member
    Join Date
    Dec 2019
    Posts
    1

    Dimmable T8 tubes or panels with high CRI (90 and above)

    This is probably a pipe dream but are there any out there that are dimmable with a 6WCL? I'm trying to replace two quad 48" fluorescent fixtures and i already installed the 6WCL.

  2. #2
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Posts
    87
    Hello elwood,Thank you for your post! Unfortunately, the Caseta Wireless PD-6WCL dimmer is only rated for line voltage screw in base type bulbs that are either Incandescent/Halogen/CFL/LED. The T8 tubes that you are referring too typically utilize a ballast and the manufacturer of that ballast would have to confirm dimming compatibility. In order for the PD-6WCL dimmer to function here, you would more than likely need to look towards an alternative LED fixture that is capable of being dimmed through a forward phase cut TRIAC based dimmer like the PD-6WCL. Hope this helps!-JustinF

Similar Threads

  1. Replacement Tubes
    By Toloma in forum General Discussion - Shades
    Replies: 9
    Last Post: 06-06-2022, 09:42 AM
  2. Replies: 1
    Last Post: 04-16-2019, 09:26 PM
  3. DIN Breaker Panels
    By BradKas in forum General Discussion - HWQS
    Replies: 0
    Last Post: 03-08-2019, 11:27 AM
  4. Toggled T8 LED tubes
    By mark2457 in forum Compatibility - LED
    Replies: 2
    Last Post: 08-25-2015, 09:34 AM
  5. Can one order just the Roller 64 & 100 tubes plus aluminum hembars?
    By RA2-Designer-Gal in forum Design Assistance - Shades
    Replies: 2
    Last Post: 07-11-2014, 01:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •