Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: Telnet no response

  1. #1
    Junior Member
    Join Date
    Nov 2019
    Posts
    5

    Question Telnet no response

    I can connect to my main repeater via telnet and get the system to execute commands, such as pressing a button. However, there is no response from the telnet session. Queries do not generate any response, even a simple ?help. Any suggestions as to what I'm doing wrong or suggestions on how to fix my problem?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    It could be the telnet client you are using. You can also check the integration protocol. There is a command for turning monitoring on/off.

    http://www.lutron.com/TechnicalDocum...ary/040249.pdf
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3
    Junior Member
    Join Date
    Nov 2019
    Posts
    5
    Finally figured it out and thought I’d document the answer for future reference. As it turns out there are two default accounts setup when shipped, lutron/lutron and lutron/integration. I was using lutron/lutron, which was not working correctly. When I logged in with lutron/integration everything started working correctly. Apparently they must be setup with difference access privileges.

  4. #4
    Junior Member
    Join Date
    Apr 2019
    Posts
    2
    Quote Originally Posted by jjprusk View Post
    Finally figured it out and thought I’d document the answer for future reference. As it turns out there are two default accounts setup when shipped, lutron/lutron and lutron/integration. I was using lutron/lutron, which was not working correctly. When I logged in with lutron/integration everything started working correctly. Apparently they must be setup with difference access privileges.
    Thank you! I've been trying to figure this out myself. That did the trick.

Similar Threads

  1. Home App *No Response* when outside of my network
    By ash1300ad in forum Troubleshooting - CAS
    Replies: 7
    Last Post: 08-28-2020, 09:23 PM
  2. No response on install
    By Albatronics in forum Troubleshooting - CAS
    Replies: 7
    Last Post: 12-09-2019, 04:41 PM
  3. No response from dimmer switch after install
    By Jsmooth65 in forum Troubleshooting - CAS
    Replies: 13
    Last Post: 03-12-2019, 11:16 AM
  4. iOS 11 + HomeKit + Lutron = No Response
    By a_ndy in forum 3rd-party Integration - CAS
    Replies: 6
    Last Post: 05-08-2018, 08:35 PM
  5. Delayed keypad action response
    By crios in forum Troubleshooting - RA2
    Replies: 3
    Last Post: 11-12-2015, 12:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •