Originally Posted by
randyc
It's going to get really complicated, really fast. You can change the default raise/lower buttons to conditionals. On the press tab you would have a conditional that says "if shade 1 is active (per your existing variable), then run action 1." Action 1 would be to lower the shade. Apply the same procedure to the hold tab except for the lights. If the keypads are in the same control station in the software, the R/L will apply to the last button pressed on either keypad. For shades I prefer the Open/Stop/Close/Stop button model. It's easy for the owner to understand because it works just like a garage door. Raise/lower would still affect the shades. For the owner it means selecting the item to control and then using R/L to adjust.