Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: HomeKit not recognizing Caseta system with mesh wireless network

  1. #1
    Junior Member
    Join Date
    Nov 2019
    Posts
    2

    Unhappy HomeKit not recognizing Caseta system with mesh wireless network

    I have a Linksys Velop system in my house (one primary node and two secondary nodes in other rooms). The Lutron Smart Bridge and main Velop node are plugged into my the wireless router/modem the cable company provided (with the Wi-Fi turned off).The Lutron app works to recognize and control my switches, but HomeKit will not recognize the smart bridge when I try to add it to my home. Additionally going into the Lutron app and selecting "HomeKit & Siri" loads for a minute then gives me an error that I "must be on your home Wi-Fi network to set up Siri."HomeKit was working fine with just the router/modem before I added the Velop. Something tells me things aren't being routed back to the modem appropriately, but I'm not sure how to set it up to work. Any suggestions?

  2. #2
    Junior Member
    Join Date
    Nov 2019
    Posts
    2

    Solved

    Turns out setting the Velop to bridge mode fixed my issue. If anyone else has the same problem!

Similar Threads

  1. Homekit & Siri - You must be on your home Wi-Fi network to set up Siri
    By scootiformi in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 10-15-2019, 05:10 PM
  2. Interface Zigbee Modules with Caseta wireless system
    By terry76 in forum General Discussion - CAS
    Replies: 0
    Last Post: 08-14-2018, 09:32 AM
  3. Not Recognizing Lutron Caseta Devices
    By MickD in forum 3rd-party Integration - CAS
    Replies: 3
    Last Post: 03-11-2017, 07:42 AM
  4. Replies: 3
    Last Post: 10-28-2015, 06:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •