Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: ELV Dimmer

  1. #1
    Junior Member
    Join Date
    Nov 2019
    Posts
    2

    ELV Dimmer

    After several months of successful use, my ELV dimmer is not working consistently. The units LEDs (top and middle) start to flash.

    I can pull out the reset tab and get it to work for a few minutes.

    Not sure how this device wires (neutral or mlc). Load is a strip of LEDs. Trying to get more info. Have to use a ladder to check the load and will pull the dimmer to check wiring.

    Thing is, it worked great.

    Thoughts?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    The top and middle LEDs indicate it is in ELV mode but detected a MLV load. See advanced instructions for how to set the mode (link below). It's not uncommon for it to work for a while then start having issues.

    Also make sure the neutral is connected.

    http://www.lutron.com/TechnicalDocum...structions.pdf
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •