Hello, giving this another shot after trying to fix this again this weekend. I'm a total electricity noob so any help would be much appreciated.I'm trying to put in a Caseta wireless dimmer on a 3-way switch. Here's their whole instruction manual:I've installed a few of these through the rest of my house with no issues on a 3-way switch and 4-way switch. It's just the can lights in my kitchen won't work no matter how I try to wire them. The bulbs are compatible because other can lights in the same room will work on the same dimmer switch.I'm trying to set up what they have on pages 2-5 in their manual (basically make a 3 way switch a 2 way switch with a dimmer.)On one end of this switch I have a 2-gang box. The switch in question has 4 wires: 1 white, 1 ground, 1 black, and 1 red. Each are wired to their own terminal.on the other end I have a 4-gang box. The switch in question has 4 wires. 1 red/white stripe, 1 ground, 1 black, and 1 red. Each are wired to their own terminal.With the light switch off, the black wire in the 2-gang box does NOT have power and the one in the 4-gang box DOES have power, if that's helpful at all.Would someone be able to maybe tell me how I should wire this to get the dimmer switch to work appropriately?