Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Control 4 Janus DMX Colour Wheel Drive

  1. #1
    Junior Member
    Join Date
    Jan 2016
    Posts
    6

    Control 4 Janus DMX Colour Wheel Drive

    I'm currently programming a QS System utilising qse-ci-dmx out to a 512 DMX interface so far all good. But the client would like to control this by a Control 4 Touch Panel and a Janus Colour Wheel Drive Cant seem to get this working at the mo Any ideas anyone?Thanks !
    Last edited by Adampg; 11-07-2019 at 12:58 PM. Reason: Spelling !

  2. #2
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Posts
    60
    Adampg, Unfortunately setting DMX color through our app is not supported. You mentioned using Control 4 Touch Panel, if that supports the OUTPUT command to control the DMX color index, you would be able to set the color of the DMX to there different color indexes as they are programmed in the HWQS software. That is only 256 different color indexes however, so it would not be the full range of color you would find in a color chart.You can use on integration protocol found here at http://www.lutron.com/TechnicalDocum...ary/040249.pdf on page 8.

  3. #3
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,266
    If HQS is controlling the color wheel and Control 4 is integrated properly, C4 should be able to do anything HQS is. I don't think you are going to get C4 to talk directly to the QSE-CI-DMX. You are probably gong to have to create a phantom keypad with button presses for the various functions.

    The other option is to have C4 talk directly to the Janus. Assuming C4 has a DMX driver and interface.
    LED, Incorporated
    Raleigh, NC 27614

Similar Threads

  1. LOS-CIR-450 Sensor to drive CCI on keypad
    By Perks in forum Troubleshooting - HWQS
    Replies: 3
    Last Post: 10-26-2015, 08:49 PM
  2. Lutron DMX module: colour controlled lights
    By Darren in forum Design Assistance - Controls
    Replies: 0
    Last Post: 07-21-2014, 07:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •