Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Can somebody give me a technical answer on couple compatibility questions below?

  1. #1
    Junior Member
    Join Date
    Oct 2019
    Posts
    1

    Can somebody give me a technical answer on couple compatibility questions below?

    All cool with the compatibility chart on bulbs and dimmers, but I would like to dig a little deeper to understand how it works.1. Why Lutron doesn't publish Minimum and maximum wattage on dimmers? 2. What exactly are the technical requirements for a bulb and dimmer to work properly? I used a MACL-LFQH-WH to dim 3 4.5W LED's and all of the lights pretty much staid on and didn't really dim enough.Then I used a MACL-153M to diem another set of same 3 units of 4.5W and it did a better job on getting them dim, but one light bulb still had a bit a glow while the other 2 were dim all the way. Other than using the quick compatibility reference, could anybody tell me the reasons, technical requirements on why some dimmers work better with some light bulbs and other do not? Thank you...

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,257
    1. Wattage restrictions are based on the ability of the device to dissipate heat. Heat isn't the issue with LEDs. Brand A, model 1 may be 1 watt but you may only need a minimum of 1 per dimmer. Brand A, model 2 may be 3 watts but you may need a minimum of 2 per dimmer. Brand B may be completely different. Lutron tests the bulbs and lists the minimums accordingly.

    2. There are no standards for the manufacture of LEDs or drivers, they vary between manufacturers and even between models of the same manufacturer. It's like trying to put a Ford part on a Chevy. Until we get some standards, there will be a lot of trial and error.

    FWIW, there is an organization attempting to establish standards. No indication of when, if ever, they might have results.
    LED, Incorporated
    Raleigh, NC 27614

Similar Threads

  1. Canít get a Couple devices to reset
    By Glackowitz in forum Troubleshooting - RA2
    Replies: 5
    Last Post: 01-17-2018, 01:54 PM
  2. Replies: 10
    Last Post: 07-16-2017, 05:49 PM
  3. Windows 10 Pro Technical Preview
    By mcignarella in forum General Discussion - HWQS
    Replies: 15
    Last Post: 09-20-2016, 05:35 PM
  4. Apple Home Kit - Potential Answer to Home Automation Integration
    By schalliol in forum 3rd-party Integration - RA2
    Replies: 46
    Last Post: 11-15-2015, 02:02 AM
  5. Props to the Lutron Homeworks Technical Support Team
    By BradKas in forum General Discussion - HWQS
    Replies: 0
    Last Post: 04-01-2015, 10:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •