Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: 1 pico 3 switches

  1. #1

    1 pico 3 switches

    Can you have 1 pico control 3 dimmer switches, so they all turn on together? Without using the hub?

  2. #2
    Senior Member
    Join Date
    Jun 2013
    Posts
    1,365
    @Helmer Electric- Yes, you'll need to put each dimmer into an addressing mode by holding the off button for about 6-7 seconds. The LED readout to the left of the dimmer should all blink dimly. Then press the off button on the Pico for the same 6-7 seconds and the dimmer should respond by ramping up and down. Repeat for each dimmer, using the same Pico from the first. If you want to change the "favorite" center button- address all the dimmers first, then manually set the dimmers to where you would like your favorite "scene" and then hold the center button for 6 seconds. There will be no feedback, so test by turning the dimmers off with the Pico and then pressing the favorite button.
    Simple automation when DIY isn't working
    intuitivehomecontrols@gmail.com
    fb.me/intuitivehomecontrols

Similar Threads

  1. Pairing Each Pico *Button* to Different Switches
    By Albireo in forum General Discussion - CAS
    Replies: 15
    Last Post: 11-01-2021, 03:34 PM
  2. Practical distances between hub and switches/pico's.
    By Bill S. in forum Programming - CAS
    Replies: 8
    Last Post: 07-03-2019, 06:09 PM
  3. will Pico Fan control Several RRD-2ANF fan switches
    By dan wellins in forum General Discussion - RA2
    Replies: 1
    Last Post: 04-21-2019, 09:40 PM
  4. Replies: 1
    Last Post: 05-12-2016, 02:07 PM
  5. Do the Pico Switches sold and shipped by Amazon work with RA2?
    By geofry in forum General Discussion - RA2
    Replies: 8
    Last Post: 11-18-2015, 12:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •