Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Raise/Lower Configuration with switched and dimmed lights

  1. #1
    Junior Member
    Join Date
    Feb 2015
    Posts
    18

    Raise/Lower Configuration with switched and dimmed lights

    Hi,i have programmed under the same WCI input a dimmable LED DALI load and a switched ON/OFF light through a QSE-IO CCO.When i cycle dim the input, on lowering, the switched light switch off right away but i would like it to always stay on and to switch off only on the OFF command.I've tried changing the "Raise/Lower configuration" option for the CCO but it seems to have no effect.Can you help me understand the meaning of that option and if there is a way to achieve what i need.Thanks

  2. #2
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Posts
    60
    Thank you for your post Mario.We would recommend emailing in to hwsupport@lutron.com with your profile so that we can look at it a bit more. In addition could you please provide a detailed description of that functionality you are looking to achieve. Hope this helps!

Similar Threads

  1. WCI Raise or Lower Scene with a Hold
    By Armando B. in forum Programming - HWQS
    Replies: 7
    Last Post: 04-07-2017, 03:42 PM
  2. Raise / Lower a single scene only
    By Whitenoise in forum Programming - HWQS
    Replies: 3
    Last Post: 03-10-2017, 09:18 AM
  3. RGB Raise Lower
    By taylorjacobs in forum Programming - HWQS
    Replies: 0
    Last Post: 08-17-2016, 01:03 PM
  4. Manual Switch Raise/Lower
    By donkeyface in forum Programming - HWQS
    Replies: 3
    Last Post: 10-19-2015, 08:33 AM
  5. Raise Lower DMX RGB Lights and Incandescent Lights
    By Armando B. in forum Programming - HWQS
    Replies: 3
    Last Post: 11-12-2014, 12:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •