Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Phantom Button with Raise/Lower Last Button Pressed - Possible?

  1. #1
    Junior Member
    Join Date
    Apr 2016
    Posts
    6

    Phantom Button with Raise/Lower Last Button Pressed - Possible?

    Hello all I'm trying to create Phantom buttons on the main repeater for the SeeTouch keypads with the function of Raise/Lower Last Button Pressed.I create the phantom button on the main repeater and then assign the function as Raise/Lower Last Button Pressed. However, it's not possible to assign it to any keypads or devices (they are all greyed out) When the Phantom button is pressed (via telnet), I just see a single event from the output: GNET> ~DEVICE,25,21,3Is there someway to accomplish this that I might be overlooking? There was a post from a few years ago, looks like someone got it to work, so hoping I'm just missing something. Thank you for any help!

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,258
    I believe, if you assign a button on the main repeater as R/L Last, the keypad is the main repeater. That is why the other devices are greyed out. You can send commands to a device the same way you send them to the main repeater. You can add a keypad (say 15b tabletop) and use it as a phantom. It does take up an address and you will get a warning when you upload that the system can't find the device but it will work. You can also hide it from the app.
    LED, Incorporated
    Raleigh, NC 27614

  3. #3
    Junior Member
    Join Date
    Apr 2016
    Posts
    6
    Thanks @randyc appreciate the info and quick response! It is probably doing R/L of last keypress on the repeater as you say, I'll see if I can do some more digging on the output of the repeater. Keypads work wonderfully with raise/lower of last button press at a site, trouble is trying to now add in Sonos control with the bridge at a site. To control Sonos volume with the R/L keys, you have to change their function to Lower Programmed Device (then link those buttons in the app to control Sonos volume). Unfortunately this means no more R/L control for the shades/lights on that keypad.

Similar Threads

  1. Replies: 0
    Last Post: 11-26-2014, 12:45 AM
  2. Replies: 0
    Last Post: 11-04-2014, 05:42 PM
  3. Momentary button like Raise & Lower...
    By whdigital in forum Programming - HWQS
    Replies: 1
    Last Post: 10-20-2014, 03:06 PM
  4. Raise or Lower on Last Button Double-Tapped
    By thomod in forum General Discussion - RA2
    Replies: 2
    Last Post: 09-02-2014, 01:57 PM
  5. Trying to raise and lower fixtures just programmed to that button
    By yaniquevirgo in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 07-31-2014, 03:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •