I'm having a very strange problem with a 3-way switch I installed with the Casèta Wireless In-wall (PD-6WCL). For all of these I used Philips recessed LED retrofit lights (65w), model# 5923242 https://www.amazon.com/Philips-80238.../dp/B07JGB9PCZ I installed one 3-way switch in the kitchen that controls 3 lights and it works fine, with no lights flashing when I turn them on from the wall switch, mounted picot remote, Lutron App, or when I use voice commands with Google Assistant (yes, smart home nerd alert). I also installed the same exact Lutron dimmer switch on a 3-way switch that controls the living room lights with 6 bulbs. Same exactly Philips bulbs as in the kitchen, and literally right next to them on the first floor (different circuit though). In the living room the lights on and off, dim up and down, and work totally fine when using the dimmer, mounted remote, and Lutron app. When I use the same voice command as I use for the kitchen the lights flash on and off, go dark, and then turn on. (I searched the forums and someone posted a video of this problem on youtube here: https://youtu.be/OUUvmHhg4Q4) I don't know why this only happens when I operate it by voice command, and to make things even stranger I tried switching out one of the Philips bulbs with a recessed LED I replaced with the Philips (higher watt but same voltage) and when I used the same voice command the flashing on/off problem was gone and it worked fine like in the kitchen. Just to experiment I took one bulb out entirely and did it with just 5 plugged--all Philips--and had the flashing problem. Any idea why this is happening ONLY when I use a voice command for google? And ONLY when I have 6 of these bulbs plugged in but not with 3 or 5? of the exact same bulb?