Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Caseta dimmers and LEDS

  1. #1
    Junior Member
    Join Date
    Sep 2019
    Posts
    3

    Caseta dimmers and LEDS

    I have a few 6wcl's and the pro dimmer 10nxd and using Satco s9438 bulbs and getting a slight buzzing noise. I have a few cases of these bulbs and thought I would try them as I don't see them listed on the Lutron list. I doubt there is anything I can do to cut the noise but thought I would ask. I am using a neutral on the pro dimmer and get the same exact buzzing. Just want to confirm it is compatibility issue. Thank You

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    Lutron tested the s9439 which is the same bulb with a different color output. However, it could have very different electronics. Lutron recommended setting the high end trim at 96% and the low end at 6%. You can find the directions here:

    http://www.lutron.com/TechnicalDocum...structions.pdf
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

Similar Threads

  1. Why Do Some LEDs Work With Dimmers and Others Don't?
    By Pete F. in forum General Discussion - LED
    Replies: 4
    Last Post: 08-22-2021, 09:15 PM
  2. RadioRa 2 dimmers with Halo LEDs?
    By jelloice in forum Design Assistance - RA2
    Replies: 5
    Last Post: 10-31-2016, 11:39 AM
  3. Why do RA dimmers cost 3X more than Caseta dimmers?
    By asherrick in forum General Discussion - CAS
    Replies: 1
    Last Post: 04-26-2015, 08:43 PM
  4. Lutron dimmers with Cooper leds
    By lgalaske in forum Compatibility - LED
    Replies: 1
    Last Post: 12-17-2014, 09:59 AM
  5. 600w dimmers LEDs blinking - not responding
    By jelston in forum Troubleshooting - RA2
    Replies: 6
    Last Post: 12-20-2013, 01:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •