Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: HN6BRL Issue

  1. #1
    Junior Member
    Join Date
    Sep 2019

    HN6BRL Issue

    I'm having a weird issue with 2 of these Hybrid keypads. I have 2 of these keypads installed in the same box side by side. The issue I'm having is if you press the scene on one keypad you can actually raise and lower the scene on the other keypad. Even though that other keypad has no load for that scene. not sure whats going on.

  2. #2
    Senior Member
    Join Date
    Oct 2013
    It's a feature! If both keypads are in the same control station in the software, the R/L from one will affect the other. The idea was that you could put a 6BRL and a 7B in the same control station and the R/L would control both, giving you an extra button.
    LED, Incorporated
    Raleigh, NC 27614

Similar Threads

  1. Issue with pd-5ws-dv-wh
    By ojzuluaga in forum Troubleshooting - CAS
    Replies: 6
    Last Post: 06-18-2019, 02:09 PM
  2. RRD-6ND / RD-RD Three Way Issue
    By keithnet in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 04-08-2019, 10:42 AM
  3. Grafix RA-GRX-6 issue
    By smileman83 in forum Troubleshooting - Legacy RA
    Replies: 1
    Last Post: 05-23-2018, 11:33 PM
  4. PD-6ANS Issue
    By Chee2828 in forum Troubleshooting - CAS
    Replies: 3
    Last Post: 03-12-2018, 09:09 PM
  5. DALI Issue
    By stevi in forum Troubleshooting - HWQS
    Replies: 0
    Last Post: 01-29-2018, 04:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts