Thanks Thanks:  1
Likes Likes:  0
Results 1 to 3 of 3

Thread: RRD-H6BR activation troubles

  1. #1

    RRD-H6BR activation troubles

    Hey all,

    I'm having a spot of bother with a RRD-H6BRL. I selected it in activation mode, went over, held the second button from the top, heard the beep, but it doesn't seem to want to activate. It's only about 17 feet from the main repeater, with no obstructions between. I did a factory reset, and tried again, same thing. I entered the serial number, hit activate, and it fails.

    Any suggestions? What am I not thinking of? What else could cause it not to activate?

    Thanks in advance,
    Ted

  2. #2
    Senior Member
    Join Date
    Jun 2013
    Posts
    1,365
    Try making a new hybrid next to this one in the design tab. Pop over to program tab and copy the programming to the new hybrid, then go back to design and delete the OLD hybrid. This used to happen occasionally with standard keypads and that usually fixed it. The key is to create and copy first so you don't have to redesign/re-do your programming.
    Simple automation when DIY isn't working
    intuitivehomecontrols@gmail.com
    fb.me/intuitivehomecontrols

  3. Thanks tedgallagher thanked for this post
  4. #3
    Thanks for the tip. Unfortunately it was my bad. Fresh eyes and a good nights sleep allowed me to see the difference between RRD-H6BRL and RRD-W6BRL.

Similar Threads

  1. Activation Issues
    By silvamarin in forum Programming - HWQS
    Replies: 4
    Last Post: 06-30-2015, 04:56 PM
  2. at&t arris nvg589 troubles connecting
    By simpletech in forum Troubleshooting - RA2
    Replies: 0
    Last Post: 12-13-2014, 05:21 PM
  3. Unable to Start Activation
    By Armando B. in forum Troubleshooting - RA2
    Replies: 0
    Last Post: 02-10-2014, 05:05 PM
  4. unable to enter activation
    By Craig W. in forum Troubleshooting - HWQS
    Replies: 0
    Last Post: 01-20-2014, 06:45 PM
  5. Failure to enter activation or transfer
    By Craig W. in forum Troubleshooting - RA2
    Replies: 3
    Last Post: 09-23-2013, 03:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •