I installed 4 Lutron 3 way dimmer switches in 4, 4 way lighting lineups. Dimmers at line side, 4 way switch in the middle, and a 3 way switch on the load end.
Turned power on at 3 way dimmer switch and circuit worked. Shut off circuit at 4 way switch, turned back on at end 3 way switch, and turned off at 3 way dimmer switch. When I went to turn on at 4 way switch, circuit didn’t work.
There was power on line input on 3 way dimmer, but no power on either travelers to the 4 way switch or on the load end 3 way switch. System only came back when I switched the 3way dimmer back to the original position.
Here’s the strange part. If I put a standard non-dimmable 3 way switch instead of the 3 way dimmer, everything works properly. Customer wants dimmer switches! Any solutions?