Scenario: In my office I will be setting up a Main Repeater, Aux Repeater, 7 Dimmers, 2 Keypads and 2 PICOS before shipping them to a client site.Given the layout of the Clients Site, the 7 dimmers and 2 PICOS will be closest to the AUX repeater and the 2 Keypads will be closest to the Main Repeater. Question: What considerations do I need to make in the order of operations or placement of the devices when I activate them? I have concerns (based off prior experience) that the main repeater and the AUX repeaters do not operate in the same manner as a single QS RF link with multiple repeaters where they can "mesh" together. It seems on older jobs where an AUX repeater has been added after the fact, I have had to re-activate some dimmers to get them to communicate "away" from the Main Repeater and to the AUX but I can't be certain.Do I actually need to space these devices out physically during activation so they are closer to the respective Main or AUX repeater or does it not matter? Anyway I go, the AUX will obviously be activated first. TIA.Also, apologies for the formatting, I can't seem to get the page breaks to take, even after editing.