Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Keypad troubleshooting

  1. #1
    Junior Member
    Join Date
    Oct 2018
    Posts
    4

    Keypad troubleshooting

    I received a call from a customer saying some of his keypads were no longer working. I found 10 out of 15 keypads were not working. Single led lit on the top of the keypad. I did a diagnostic and no keypads were showing up. Even though some were working. I disconnected all of the keypad feeds and tested each feed individually thinking a bad keypad may take down the entire link. Each feed tested fine and by the end, all keypads showed up. But when I connected all of the keypads back up, nothing would show up. I have a call into tech support and am waiting to hear back but my initial thought is the 15v power supply. Thing is when I metered the power supply it read 16.5vdc. Anyone have this issue? Toph

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    Your instincts are correct. I've seen the power supply read proper voltage but under load it cant keep up. Seems like the plug-in power supplies are the most susceptible. You could try unplugging a few of the keypads to test. How many is a WAG. The power supply in its current condition might be able to power 14 or just 1 or none at all.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3
    Junior Member
    Join Date
    Oct 2018
    Posts
    4
    Thanks Randy. I have a power supply on order. I'll report back what I find. Toph

Similar Threads

  1. PD-5NE dimmer Installation Troubleshooting
    By McRob in forum Troubleshooting - CAS
    Replies: 0
    Last Post: 12-14-2018, 11:34 PM
  2. Troubleshooting a Pico remote
    By mike123abc in forum Troubleshooting - RA2
    Replies: 0
    Last Post: 06-02-2018, 09:18 PM
  3. MS-OPS2 or MS-OPS5M Troubleshooting
    By Kevin P. in forum Troubleshooting - Controls
    Replies: 0
    Last Post: 02-11-2016, 03:36 PM
  4. MI troubleshooting
    By Craig W. in forum Troubleshooting - Legacy HW
    Replies: 1
    Last Post: 08-19-2014, 01:06 AM
  5. Advanced Timeclock Troubleshooting
    By Armando B. in forum Troubleshooting - HWQS
    Replies: 1
    Last Post: 04-21-2014, 03:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •