Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5

Thread: Caseta Wireless Dimmer Not pairing

  1. #1
    Junior Member
    Join Date
    Jul 2019
    Posts
    3

    Caseta Wireless Dimmer Not pairing

    I have installed a Caseta Wireless Dimmer switch and it is working properly.I don't have the bridge installed.I had initially paired it with a Pico remote. But the remote stopped working. I've followed instructions to unpair the remote.Now when I attempt to pair the remote with the switch, I cannot get the switch to go into "pairing Mode".I've followed instructions on holding down the off switch but the switch does not go into the flashing behavior.Any ideas?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,046
    You need to reset the dimmer/switch as well. It still thinks it is paired to another device. Here is a rather exciting demo by our own SDR-Mike on resetting devices. https://forums.lutron.com/showthread...actory+default
    LED, Incorporated
    Raleigh, NC 27614

  3. #3
    Junior Member
    Join Date
    Jul 2019
    Posts
    3

    Arrow Unpairing?

    Quote Originally Posted by randyc View Post
    You need to reset the dimmer/switch as well. It still thinks it is paired to another device. Here is a rather exciting demo by our own SDR-Mike on resetting devices. https://forums.lutron.com/showthread...actory+default
    But the instructions are to hold down the off button for six seconds...not multiple taps?

  4. #4
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,046
    For the Pico remote Quickly tap the OFF button 3 times and hold (as noted in the video you can tap more than 3 but you must hold at the end) When the LED comes on solid (~6 seconds), quickly tap the OFF button 3 times (or more) and release. Give it a minute to reset. For the dimmer Quickly tap the ON button 3 times (or more) and hold When the LED begins to flash quickly (~6 seconds), quickly tap the ON button 3 times (or more) and release. Give it a minute to reset. You need to be pretty quick with the taps.
    LED, Incorporated
    Raleigh, NC 27614

  5. #5
    Junior Member
    Join Date
    Jul 2019
    Posts
    3

    Thanks

    Quote Originally Posted by randyc View Post
    For the Pico remote Quickly tap the OFF button 3 times and hold (as noted in the video you can tap more than 3 but you must hold at the end) When the LED comes on solid (~6 seconds), quickly tap the OFF button 3 times (or more) and release. Give it a minute to reset. For the dimmer Quickly tap the ON button 3 times (or more) and hold When the LED begins to flash quickly (~6 seconds), quickly tap the ON button 3 times (or more) and release. Give it a minute to reset. You need to be pretty quick with the taps.
    Worked like a charm !thanks

Similar Threads

  1. Replies: 8
    Last Post: 04-23-2019, 11:24 AM
  2. In wall dimmer pairing
    By ajack in forum Troubleshooting - CAS
    Replies: 2
    Last Post: 12-14-2018, 12:10 PM
  3. Can Caseta In-wall dimmer pairing with Radio Powr Savr Motion Sensor?
    By davidchanty in forum Design Assistance - CAS
    Replies: 11
    Last Post: 11-03-2018, 10:15 AM
  4. Wireless lamp dimmer not pairing
    By payday26 in forum General Discussion - CAS
    Replies: 3
    Last Post: 02-02-2016, 01:29 PM
  5. Caseta in-wall wireless Dimmer will not go in to pairing mode
    By dan2016 in forum General Discussion - CAS
    Replies: 1
    Last Post: 10-28-2014, 11:01 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •