Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Demo of factory default

  1. #1
    Senior Member
    Join Date
    Jun 2013
    Posts
    1,365

    Demo of factory default

    Sorry for the dropbox links, the attachment button is not working.Proper default- notice how fast you need to push. You can do more than three taps, I like five.https://www.dropbox.com/s/msuopf2ppe....MOV?dl=0Video of difference between an activated dimmer vs. an un-activated one. Fast blink is activated, slow is not.https://www.dropbox.com/s/f2eczgf3hi..._0512.MOV?dl=0
    Simple automation when DIY isn't working
    intuitivehomecontrols@gmail.com
    fb.me/intuitivehomecontrols

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    If you though the Lutron reset procedure was tricky, check out this procedure from GE.

    We recommend counting with Mississippi (1 Mississippi, 2 Mississippi, 3 Mississippi, etc.).

    Start with your bulb off for at least 5 seconds.
    Turn on for 8 seconds
    Turn off for 2 seconds
    Turn on for 8 seconds
    Turn off for 2 seconds
    Turn on for 8 seconds
    Turn off for 2 seconds
    Turn on for 8 seconds
    Turn off for 2 seconds
    Turn on for 8 seconds
    Turn off for 2 seconds
    Turn on
    Bulb will flash on and off 3 times if it has been successfully reset. That was apparently an upgrade from this one:

    Turn on for 8 seconds
    Turn off for 2 seconds
    Turn on for 2 seconds
    Power off for 2 seconds
    Turn on for 2 seconds
    Power off for 2 seconds
    Turn on for 2 seconds
    Power off for 2 seconds
    Turn on for 8 seconds
    Power off for 2 seconds
    Turn on for 8 seconds
    Power off for 2 seconds
    Turn on
    Bulb will flash on and off 3 times if it has been successfully reset.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3
    Senior Member
    Join Date
    Jun 2013
    Posts
    1,365
    if you only knew how many times I've tried to describe this over the phone...
    Simple automation when DIY isn't working
    intuitivehomecontrols@gmail.com
    fb.me/intuitivehomecontrols

Similar Threads

  1. Factory reset QSE-IO
    By paulo.calderon@trazzo.pe in forum Programming - HWQS
    Replies: 4
    Last Post: 03-15-2021, 03:36 PM
  2. Dealer. I can't register demo shade in Ra2
    By etrochez in forum Troubleshooting - Shades
    Replies: 1
    Last Post: 09-15-2016, 07:17 PM
  3. Repeater Factory Default
    By erphillips in forum Programming - Legacy RA
    Replies: 1
    Last Post: 08-31-2016, 08:39 PM
  4. How to factory default a Caseta dimmer.
    By Brian W. in forum General Discussion - CAS
    Replies: 1
    Last Post: 05-01-2016, 12:05 PM
  5. Factory reset SmartBridge
    By yan@dytronix.com in forum General Discussion - CAS
    Replies: 8
    Last Post: 10-24-2014, 12:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •