Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Fan Control w/ LED Light from multiple locations

  1. #1
    Junior Member
    Join Date
    Jun 2019
    Posts
    1

    Question Fan Control w/ LED Light from multiple locations

    Would like to be able to turn on/off both fan and light at two locations (entrance/egress from entry) and hopefully be able to set light level, fan speed, etc. from one. I'm ok with conventional 3-ways for the simple on/off if a standalone control can be paired in parallel or if one of the locations has that control, that's fine, too.

    I couldn't discern from the product spec document for the Skylark and/or Adriani products whether need two units, one for light, one for fan or is there a dual package so I can do roughin for number of boxes, wires to pull...

    A wall mount remote unit in parallel work for this purpose?

    Better solutions always welcome!

    The target device is Hunter Prim unit with LED light kit if it really matters any -- does not come with remote but there is an add-on available leading to the above question regarding it.

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    All of the Lutron dual controls (fan speed and dimmer in one device) are single location only. The Skylark fan control is a single location only. The Skylark Contour (CTFSQ-F), Ariadni (AYFSQ-F), and Diva (DVFSQ-F) are all 3-way devices. When used with standard mechanical 3-way/4-way switches you have on/off control all locations but dimming only from the FSQ. FSQ devices must be installed at the beginning or end of the circuit. There are a number of dimmers in these families that work the same way. It all depends on the load type and capacity.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

Similar Threads

  1. Multiple switches for one light issue
    By goobergolf in forum General Discussion - Controls
    Replies: 2
    Last Post: 10-25-2018, 07:18 AM
  2. Alexa & Lutron Caseta use in 2 locations
    By Bdeller in forum 3rd-party Integration - CAS
    Replies: 0
    Last Post: 10-23-2018, 03:10 AM
  3. Multiple Light Dimming with PowPak RMJS-8T-DV-B?
    By Beardog in forum General Discussion - Vive
    Replies: 2
    Last Post: 07-14-2018, 02:32 PM
  4. Maestro Fan/Light control for multiple Fans
    By paulhanks in forum Design Assistance - Controls
    Replies: 0
    Last Post: 01-15-2015, 11:35 AM
  5. VCTX Can Control Multiple VCRXs
    By Armando B. in forum Programming - RA2
    Replies: 0
    Last Post: 05-08-2014, 12:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •