Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7

Thread: Extracting project from 2 HW 8series interconnected

  1. #1

    Unhappy Extracting project from 2 HW 8series interconnected

    Hi,
    please how can we extract a project from a system with two HW 8series interconnected? I don't have any backup and I must create a project with two processors
    is there any docs?
    thanks a lot

  2. #2
    in other way, how to extract files in multi processor job?

  3. #3
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    402
    techniquesmethodes,

    To extract you must create a new file with the two HW 8-Series processors. Once you have the two processors in the file and addressed then you will need to connect to them in terminal. Once you establish a connection in terminal you can then go to File>Extract Project on the Terminal screen. After the extraction is successful you will need to save the file.

  4. #4
    thank you Kevin,
    how to create a file with two HW 8series processors? is there any documentation

  5. #5
    no help :-(

  6. #6
    Authorized Lutron Contributor
    Join Date
    Apr 2013
    Posts
    403
    Using the HomeWorks Illumination software you would need to create a new project file. Then in the panel assignment screen you would need to add the proper panels that the processor go into. After the panels are added you would add a processor into each panel. For assistance on adding the proper panel and processor into the project file please refer to the help file that is included in the software.

  7. #7
    thank you very much

Similar Threads

  1. Extracting program from QS processor fail
    By thwertz in forum Troubleshooting - HWQS
    Replies: 1
    Last Post: 06-03-2015, 02:27 PM
  2. extract project
    By iControl in forum General Discussion - RA2
    Replies: 2
    Last Post: 01-30-2015, 10:26 PM
  3. Does extracting a file include homeowner edits by the app?
    By bloucks in forum General Discussion - HWQS
    Replies: 2
    Last Post: 04-07-2014, 08:29 AM
  4. Project file Extraction and Baud Rate
    By Armando B. in forum Troubleshooting - Legacy HW
    Replies: 1
    Last Post: 03-25-2014, 02:01 PM
  5. Extracting the XML
    By Ty W. in forum 3rd-party Integration - HWQS
    Replies: 0
    Last Post: 09-25-2013, 09:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •