I’m trying to get my new dimmer switch to function but I’m having an odd issue:
Two switches: A & B
Switch A (Pico remote side): With all wires disconnected I get 120VAC on the HOT and 0VAC on each of the Travelers separately. Then I tie the Hot wire to the other two Travelers.
Switch B (Caseta Dimmer side): With Switch A tied together, I get 120VAC on each of the Travelers and 0VAC on the LOAD. I then tie the two Travelers to one wire on the dimmer and the Load to the other.
With the circuit energized I get 120VAC from the HOT/TRAVELER bundle to ground on Switch A.
However, on Switch B, I get 120VAC from the travelers to ground but the LOAD TO GROUND PULSES ON AND OFF, the switch does not turn the load on or off, and none of the green LED’s on the switch function!