Two different wall plates

[Squill]

I have two different locations that control the same light. The wall plate with 3 switches controls light 1, 2, and 3. The other wall plate only controls light 1. What kind of setup do I use for the caesta lighting?

[randyc]

#1 is a 3-way circuit. You have 2 options.

You can use a PD-6WCL and a Pico remote. There are special wiring instructions in the Caseta Advanced instructions.

You can use a PD-10NXD with a mechanical 3-way (like the existing switch) or with the Pico remote. There are special wiring instructions in the Caseta Advanced instructions.

They both have their pros and cons.

http://www.lutron.com/TechnicalDocum...structions.pdf