Thanks Thanks:  0
Likes Likes:  0
Results 1 to 6 of 6

Thread: Help / PD5WS-DV / Flashing LED

  1. #1
    Junior Member
    Join Date
    Sep 2016
    Posts
    6

    Help / PD5WS-DV / Flashing LED

    I am installing this switch and all works OK, except the LED on the switch is flashing red. I see from discussions that this means the RF is not working. I also saw that I might need to the install the MRC that came with the switch. Here is my confusion. I am using this switch because I don't have a neutral for this switch. The PD5WS-DV does not require a neutral. Yet all of the instructions I have found for installing the LUT-MRC shows installing across the switch hot and the neutral.

    Is there another way to install the MRC? Will it really solve my flashing red led?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    There is a good chance the MLC will resolve the issue. If you don't have a neutral in the wallbox you can install the MLC at the fixture. Additional directions at the link below.

    http://www.lutron.com/TechnicalDocum...ary/041294.pdf
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3
    Junior Member
    Join Date
    Sep 2016
    Posts
    6
    Great. I have 7 fixtures attached to this switch. Do I install an MRC at each fixture? Finger crossed it is just one fixture.. I just caulked them all.

    Thank-you.

  4. #4
    Just 1.

    Have you tried an old incandescent bulb in one of them? If you have one.

  5. #5
    Junior Member
    Join Date
    Sep 2016
    Posts
    6
    No. These are Minka-Lavery lights, that have integrated LED's. So I can't try a any other bulbs.

    I have an MRC and I will try it across the one of the lamps and report back.

  6. #6
    Junior Member
    Join Date
    Sep 2016
    Posts
    6
    Quote Originally Posted by randyc View Post
    There is a good chance the MLC will resolve the issue. If you don't have a neutral in the wallbox you can install the MLC at the fixture. Additional directions at the link below.

    http://www.lutron.com/TechnicalDocum...ary/041294.pdf

    Thanks. That worked. Now onto the Serena Shade Project!

Similar Threads

  1. Flashing Red LED on PD5WS-DV
    By Justin.coolDallas in forum Troubleshooting - CAS
    Replies: 4
    Last Post: 05-11-2021, 08:11 AM
  2. Flashing in iOS app only
    By Dalcombright in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 03-02-2019, 12:25 PM
  3. Pd5ws
    By RyanL in forum Troubleshooting - CAS
    Replies: 4
    Last Post: 12-30-2016, 02:06 PM
  4. Flashing LED
    By PCH2OMAN in forum Troubleshooting - CAS
    Replies: 4
    Last Post: 03-10-2016, 01:32 PM
  5. RRD-6CL Flashing When Off
    By schalliol in forum Troubleshooting - RA2
    Replies: 7
    Last Post: 02-22-2016, 05:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •