Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: HWQS Outdoor Sensor integrated into HWQS

  1. #1
    Junior Member
    Join Date
    May 2019
    Posts
    1

    HWQS Outdoor Sensor integrated into HWQS

    Our HQWS was installed in 2017 with indoor and extensive outdoor lighting on the system. We are interested in adding motion sensors to the system such that the motion sensors will turn on all the outdoor lights via the HWQS system and using Savant we would set up notifications to notify us that the outdoor lights turned on. The systems is a combination of hard wired (20) switches and 2 wireless switches. Any guidance or suggested reading would be appreciated.

    Thank you

    Frank

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,207
    Lutron has some outdoor products but they have not worked their way into HQS yet.

    There are some good quality motion sensors out there. I would contact your security company. They are likely to have the most/best options.

    The easiest way is to have the sensor output a contact closure. You can use it to turn selected lights on. Savant won't know if the lights were turned on via button press, timer, CC, etc. You could put the CC on a 2nd button and use that feedback to signal Savant. I don't know much about savant but you may be able to have the CC go to Savant and have it send a command to HQS to turn the lights on.
    LED, Incorporated
    Raleigh, NC 27614

Similar Threads

  1. Wireless Daylight Sensor in HWQS. And potential work arounds.
    By Kingfisher in forum General Discussion - HWQS
    Replies: 4
    Last Post: 11-29-2018, 05:24 AM
  2. Outdoor Motion Sensing Flood Lights integrated with RadioRA2?
    By geofry in forum Design Assistance - RA2
    Replies: 1
    Last Post: 02-16-2017, 05:22 PM
  3. HWQS HVAC controller & Wired Flush Mount Sensor
    By jihad kutkut in forum Troubleshooting - HWQS
    Replies: 1
    Last Post: 01-02-2017, 10:32 AM
  4. HWQS Powr Savr occ / vacc sensor with Control4
    By Ojeakev in forum 3rd-party Integration - HWQS
    Replies: 1
    Last Post: 06-27-2016, 10:51 AM
  5. How to Integrated the HWQS with Crestron ?
    By stevi in forum General Discussion - HWQS
    Replies: 5
    Last Post: 06-01-2014, 11:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •